Remote Heat Recovery Unit

Upgrade any air conditioner, large cooler or freezer, or heat pump system into a source of free hot water.

By far, this is our most popular aftermarket solution because it can be located directly adjacent to the compressor without regard to the tank location.

It connects to one or two compressors and can connect to any hot water tank.

Remote units can be installed indoors or outdoors, on the roof, or wherever the compressor is located. That means that the refrigerant lines can be very short and the system is quite simple to install.

Applications:

Cooler Compressor
Freezer Compresor
Air Conditioner
Heat Pump
Ice Maker

Freeze-protected for outdoor installation.

The HotSpot Heat Recovery Remote Unit captures waste heat discharged from the refrigerant cycle of a refrigeration system (air conditioner, heat pump, walk- in cooler or freezer etc.) and transfers the superheat into a water heater tank, making free hot water.

Operation of the HotSpot system eliminates or reduces the amount of energy required to produce hot water and improves the cooling efficiency of the refrigeration system.

The HotSpot remote units come in various designs and sizes for operation with refrigeration systems of 1 to 100 tons of cooling capacity for both commercial and residential applications.